HIGH-Q POINT SOURCE 12″ ARRAYABLE LOUDSPEAKER
ALIS12
2-Way Bi-amped Enclosure
1 x 12-inch neodymium LF cone drive, vented box
1 x 1.4-inch exit (3-inch voice coil) compression driver, attached to a waveguide
Power
710 W AES / 1400 W continuos
Impedance
LF: 8 Ohm / HF: 16 Ohm
SPL
131 dB nominal / 137 dB continuous
Weight
30 Kg
The exceptional scalability and the ability to form small arrays of two, three or four cabinets with strict control of dispersion makes ALIS12 capable of adjusting to any audience geometry, being the ideal choice for distributed systems in sports venues. Arrays can be flown horizontally or vertically, or stacked when needed.
ALIS12 show no angle settings to calculate or spread adjustments to implement for each show, as these is already fixed. Tecnare’s DP4896 and DP2696 processors provide presets for ALIS12 arrays to quickly optimize your system. With the Ease Focus 2 acoustical prediction program you can create accurate acoustic simulation.
ALIS12 offer unbeatable audio performance for all kind venues, where polar control, high-output, lowdistortion, and the highest quality sound are required. Constructed of premium WISA birch plywood, ALIS12 enclosure are covered with a hard-shell finish coating. Rigging is made out of aluminum to lower weight and optimize weatherization.
ALIS12 can be sold in passive version.
Features
- Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
- 1 x 12-inch-LF cone driver / 1 x 1.4-inch exit (3-inch voice coil) HF compression driver coupled to a waveguide
- Plug-and-play package, quick set-up and easy flying
Applications
- Theatres and theatrical sound reinforcement
- Stand alone system
- Center and Sidefill applications
- Concert Halls, distributed systems and clubs
| Frequency Response: | 55 Hz – 20 kHz ±4dB, measured on axys |
| Components: | 1×12” neodymium LF driver, 3” voice coil, 1×1.4’’ exit compression driver |
| Nominal Dispersion: | 20º x 75° @-6dB |
| Impedance: | LF: 8 Ohm / HF: 16 Ohm |
| Axial Sensitivity: | 104 dB |
| Calculated SPL: | 131 dB nominal / 137 dB continuous |
| Power Handling: |
710 W AES / 1400 W continuos *LF power: 600W AES @8ohm *HF power 110W AES @16ohm |
| Dimensions (HxWxD) (millimeters/inches): | 654,5 x 388 x 582,6 mm / 25.77″ x 15.27″ x 22.94″ |
| Net Weight (kg/Pounds): | 33,5 Kg / 73.85 lbs |
| Construction: | 16mm birch plywood. Finished in black semi-matt textured Polyurea weatherized coating. One recessed by side carrying handle. |
| Grille: | Powder coated perforated steel with acoustically transparent reticulated foam. |
Optional passive crossover network
Accessories:
- Colors Versions:
-White color
-Black color
- Pickup plate: THV-ALIS12
- Pickup plate: THF-ALIS12 Array frame for 2 units
- Top Grid: TTG-ALIS12
- Shocket mounting bracket TA12-SMB
- Wooden dolly TWD-ALIS12
- TecB004 Load Spreader Bar
- Soft Cover for ALIS12
Theatres and theatrical sound reinforcement
Stand alone system
Center and Sidefill applications
Concert Halls, distributed systems and clubs
Horizontal & Vertical Array Rigging
The ALIS12 offer extremely easy to use rigging, making the system highly versatile from touring, rental and fixed installations. ALIS12‘s sides include a couple of aluminium rail that allow the unit to be easily linked with other ALIS12s in arrays by means of TALBX12 bar.
The optional THVALIS12 pickup plate allows lifting ALIS12 horizontal arrays of up to four units with uptilt or downtilt from a single hanging point; two pickup plates can lift arrays of up to six units from a single hanging point or motor using the TecB004 Universal Fly bar. The Optional THFALIS12 plates to join the units in fixed installations are available.
The Optional TTGALIS12 bar suspends vertical arrays of up to six ALIS12s.
The Optional TA12SMB pole socket mounting bracket allows using one ALIS12 on pole mounted on a subwoofer or standard loudspeaker tripod stand.
Other options include weather protection and custom colour finishes for fixed installations and applications with specific cosmetic requirements,
TWDALIS12 wooden dolly board for moving the enclosure and protecting the front grill during transport and storage.
ALIS12 Accessories
THV-ALIS12
THF-ALIS12
TALBX12
TTG ALIS12
TWD-ALIS12
TecB004
two THV-ALIS12 or THVALIS15 pickup plates from a single point for hanging arrays of up six ALIS12s or ALIS15s.
TSM-ALIS12
adapter allows to ALIS12 to
be mounted onto a 35mm
(3/8”) diameter pole. It must
be ensured that the speaker
stand is capable of support
the weight of assembly
