• 2-Way Bi-amp enclousure
  • 2 x 10-inch LF cone, dipolar shape, Vented box
  • 1 x 1.4-inch HF compression driver mounted on one waveguide coupled to a CD horn






710 W AES / 1420 W continuous

136.5 dB continuos / 142.5 peak


LF: 8 Ohm / HF: 16 Ohm

35 Kg

The CLa21 is a high-power, bi-amp two way, line array module engineered to deliver an incredible output for use in indoor or outdoor all kind spaces. The Tecnare CLa21 has enough new solutions to make the work of sound engineers easier .

First of all we have established a design criterion in which the size of the cabinet is extremely compact. The bass and mid section are conformed by two 10″ dipolar mounted drivers and High frequency is handled by a 1.4” exit (3-inch voice coil) compression driver attached to a pattern controlled (75º horizontal x 13º vertical) symmetrical curved waveguide. The advanced bass-reflex and port arrangement delivers full bandwidth capabilities with an extended LF output. Due to the dipolar arrangement of the LF drivers, a broadband, horizontal directivity control is maintained down to approximately 500 Hz.

The system’s shape is trapezoidal , so we can better angle and focus it’s elements. This feature could partially solve front applications, if the front focused elements could be managed independently a part from the other elements of the array.

The enclosure has been made with the latest techniques assuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is covered with rugged Durawound texture finish and protected with epoxy powder coating grills.

The system’s choice can be passive (CLa21), and self-powered without networking (Cla21A) or with networking remote PC control (CLa21 PCC3).



  • High output to size ratio
  • 2 x 10-inch-LF cone, dipolar shape, vented box/ 1 x 1.4-inch exit (3-inch voice coil) HF compression driver mounted on one waveguid attached a CD Horn
  • Exceptional pattern control due to symmetrical design


  • Theater
  • Touring sound, sports arenas
  • Near-field applications
  • hotel ballrooms live clubs and disco
  • corporate A/V, performing arts centers

Frequency Response:                                                    60/80(1) Hz- 18 Khz
Components:                                                                  Low and mid: 2 x 10”, 3.5” voice coil; HF: 1 x1.4” compression driver, 3” voice coil
Nominal Dispersion:                                                     Horizontal: 75º; Vertical: depending on array length and configuration
Impedance:                                                                     LF: 8 Ohm / HF: 16 Ohm
Axial Sensitivity:                                                            108 dB (1w/1m)
Calculated SPL:                                                              136.5 dB continuos / 142.5 peak
Power Handling:                                                            710 W AES / 1420 W continuous
Dimmensions (HxWxD) (millimeters/inches):         320x741x479mm / 12.6″ x 29.7″ x 18.85″
Net Weight (kg/Pounds):                                              35 Kg / 77.16 lbs
Construction:                                                                  16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle.
Grille:                                                                                Powder coated perforated steel with acoustically transparent reticulated foam.
(1) Standard (CLa21 preset)/CUT mode (CLa21_80 preset)


-Color Versions:

  • White color
  • Black color

-Multipurpose Top Grid: THV-21/18V
-CLa21 AngExt Angle extension Arm for THV-21/18VR

-Wooden dolly CLa21: TWD-21

-PB-CLa21 PullBack

-Three-high CLa21 Transit Cover: Covers three stacked
-Four-high CLa21 Transit Cover: Covers four stacked
-Flight-case for CLa21: Road-ready Flight Case for 4 x CLa21


  • CLa-21 DSP Fixed on factory
  • CLa-21 PCC-3 Network controlled DSP





Touring sound, sports arenas


hotel ballrooms live clubs and disco


corporate A/V, performing arts centers

Privacy Preference Center


They are used to know if you have already accepted our policies, if you are already subscribed to our newsletter, to recognize the status of your session if you had it and to serve the contents faster.

No IPs are captured even for the Analytics service so your visit is private.

Se usan para saber si ya aceptaste nuestras políticas, si ya estás suscrito a nuestra newsletter, para reconocer el estado de tu sesión si la tuvieses y para servir más rápidos los contenidos.

No se captura IPs ni siquiera para el servicio de Analytics así que tu visita es privada.



We will store data in an aggregated form about visitors and their experiences on our website. We use this data to fix bugs and improve the experience for all visitors.